1 |
Choose the [download and install] icon to download the MB BIOS.
The MSISetup will automatically start up after download. Click the
[Next] button at the following page. |
|
|
2 |
There are two ways to flash BIOS. Default setting is [In Windows mode], and click [Next] to finish BIOS update. |
|
|
|
|
3 |
Choose [In Dos mode (USB)], and click [Next]. Then BIOS will be downloaded to USB pen drive. |
|
|
4 |
Insert the USB disk to make USB boot disk, then choose the target drive from the drop down list. |
|
|
|
|
5 |
After click the [Next] button, the system will pop up to ask
“All data on drive will be lost, are you sure?” Choose [OK] to continue,
or [Cancel] to cancel the process. |
|
|
6 |
After click the [OK] button, the system will start to do the USB
boot disk. The processing time will depends on the size of the USB
disk. For a USB disk with 4GB will take around 1 minute. A pop up
message “USB bootable disk has been created successfully!!” will show up
when finish. |
|
|
|
|
7 |
Click [Start] to restart the computer. Click [Cancel] to cancel
the restart. Click [Back] to go back to the previous step |
|
|
8 |
After restart, please set the computer to boot from USB. When
the computer restarts from USB, please follow the instruction to update
BIOS. |
9 |
There are two ways to flash BIOS. Choose [In Windows mode], and click [Next]. |
|
|
|
|
10 |
Choose [Close all listed programs], then click [Next] |
|
|
11 |
Click [Start] to start flashing BIOS. The system will restart when the process is complete. |
|
|
|
If you found solution then you can follow me and send me your Suggestion on Satishrana93@gmail.com
|
No comments:
Post a Comment